GSM Based Fire Protection System By Using Arduino

By | April 11, 2015

Did you know 87% of fire damages occur due to lack of early fire detection | Fire Protection System, but Now we will try our best to reduce this Percentage with the help of Technology so let,s Start to discuss that how this project will work? 

When a fire occurs the Gsm Module will send an SMS to a specified user’s Mobile numbers that “fire occurred in New Room” or anything you can replace this message with your Own string.

By default Threshold Value for temperature in code is set to, if (Temp_alert_val>45) when the temperature reaches to 45c it will send SMS to a user Mobile Number that fire Occurred. you can Replace the temperature value by your Own but remember that normal Room temp is nearly equal to 25c before setting your Temp threshold first make sure what is your Room temp and set the Threshold value on the basis of Room temp. You can Replace this Mobile number by a person Cellphone number to receive a Fire alert SMS (“AT+CMGS=”+9195440000000″r”).

* Its semester project, for business use first you need to get Licence and authority letter from National Power source company.

Circuit & coding part

Download Code

4 thoughts on “GSM Based Fire Protection System By Using Arduino

Leave a Reply

Your email address will not be published. Required fields are marked *